Writings, Views, Reviews and Softwares Reviews

WOW Error 132

2012-02-11T00:01:00.000-08:00

World of Warcraft fans are found complaining about WOW error 132.They can able to play the game for 20-30 minutes and then the following errorappears:

Error 132: “This application has encountered a critical error.”

There are several approaches to stop this error.This article deals with its causes and solutions which are easy and quick.

Clear WOW Cache
Properly Adjust the Firewall Settings
Close Non-Critical Applications
Uninstall and Reinstall WOW
Launch OpenGL Mode
Repair your Registry

Clear WOW Cache

If the problem is associated with the files stored in theWorld of Warcraft cache folder, then just clearing the cache helps. First closethe game if it is already running and do the following steps:

Double click MyComputer icon on your desktop.
Open C:\Program Files\World of Warcraft 2\Cache
Press Alt key,select Edit | Select All.
Press Delete keyof your keyboard and move these files to the Recycle Bin.

Properly Adjust theFirewall Settings

The firewall settings may be denying network connections madeor processes executed by World of Warcraft. Adjust them properly to resolve WOW error 132.The steps depend on the firewall software you use. Refer to its help andsupport manual for more information.

Close Non-CriticalApplications

If there are too many applications running at the same timeyou play WOW, then internal memory issues can arise. Close most of them to enable the game getting morememory and fix WOW error 132.

Uninstall andReinstall WOW

Problems with the installation files should also beanalyzed. Try uninstalling and then reinstalling the game to get your problemfixed.

Click Start,select Run.
Type AppWiz.cplin the Open box and press ENTER.
Select World ofWarcraft from the list of installed programs. Click Uninstall option.
Follow the procedure till the wizard is completed. Then restartyour system.
Insert the installation media, double click SETUP.EXE or INSTALL.EXE. Follow the wizard.

Launch OpenGL Mode

In OpenGL Mode, the game can run fine without any issue.Solve your problem by doing the steps mentioned below:

Right click World of Warcraft icon on your desktop.
Select Properties.
Click Shortcuttab in the new dialog.
In Target box, add–OpenGL at the end of the TargetPath.
Click Apply | OK.

Repair your Registry

Make your registry junk-free. Clean all the registry entrieswhich direct to non-existing files and folders. Download a Registry Cleaner program such as RegInOut. It will completely fix WOW error 132.

Fix Call of Duty (COD) 4 Lag in PC

2012-02-10T06:45:00.000-08:00

Call of Duty 4 lagging is not new for gamers. Theyexperience it no matter for how they are playing it. The game stopsresponding for a while and again works fine. This happens all the time and theenjoyment turns into mere frustration. Are you experiencing COD lags too? If so, you havecome at the right place.

Call of Duty (COD) 4

Solutions:

Change Process Priority and Affinity
Enable Steam Cloud Sync
Defrag your Registry
Restore Player Settings to Defaults
Prevent Graphics Card from Overheating
Optimize Services

ChangeProcess Priority and Affinity

Each process in the queue is performed based on itspriority. Using Task Manager, change the process priority and affinity so as tofix Call of Duty (COD) 4 lag in PC.

Press Ctrl + Alt + Delete.
Select Start Task Managerand press ENTER.
Click Processestab in the new dialog.
Right click Callof Duty.exe process and select SetPriority | High.
Again, right click it and select Set Affinity. Deselect CPU 0and keep CPU 1 checked.
Click OK andclose the Task Manager.

EnableSteam Cloud Sync

Steam Cloud stores game data of several supporting games.For instance keyboard and mouse settings, single player game data and so on. To fixCall of Duty (COD) 4 lag in PC make Steam Cloud 'Sync enabled'.

Double click Steamshortcut on your desktop.
Right click Callof Duty icon, select Steam Library| Properties.
Click Updatesand make Enable Steam Cloud Syncunchecked.
Save the settings.
Restart the game for the changes to take effects.

Defragyour Registry

Registry is a system database that contains severalcomputer settings and user data. This information becomes fragmented over aperiod of time. This is because nowadays almost all programs use registry andcontinuously modify it.

For the smooth running of the game it isimportant to make sure that your registry is not fragmented. In other words,defragment it by using a Registry Defrag software such as RegInOut.

RestorePlayer Settings to Defaults

COD lags are also experienced if the player settings arechanged. Restore them to defaults to fix Call of Duty (COD) 4 lag in PC.

Windows Explorer

Open My Computer.
Double click C:\ProgramFiles\Steam.
Open SteamApps\Common\Callof Duty Black Ops\Players.
Right click and delete the following files present in theabove directory: Config.cfg, Config_mp.cfg

PreventGraphics Card from Overheating

If your graphics card is overheating may be because ofdust or other reasons, you may start experiencing said lags. In order to fixCall of Duty (COD) 4 lag in PC, clean your computer, graphics card andprocessor so that no components will overheat.

OptimizeServices

The background services needs to be checked once again.There can be certain tasks that use most of your RAM and thus Call of Dutyfreezes. Optimize the background services by performing the steps mentionedbelow:

Run

For Windows XP, click Start, select Run. ForWindows Vista and Windows 7, click Start,focus on Search box.
Type Services.msc
Press ENTERkey.
Stop all unneeded services.

Tip: Reduce COD 4 Lag Through Game Optimizer Tool

SEO guy checking Google Rankings -- A Funny Picture

2012-02-04T04:32:00.000-08:00

Today i saw a picture. I just wanted to share it with you guys, please respond if you like it :)

Remove Win 7 Virus Instantly

2012-02-02T22:32:00.001-08:00

Win 7 Antivirus is a spyware program made by cybercriminals for getting users trust and forcing them to pay for useless features.

The program claims itself to be a computer securitysoftware that has the ability to detect and find viruses. However, that’s notthe truth at all. It is a fake security software that has no ability toprotect a computer. Moreover, it tries to force the users to pay a specific price. When the user buys the program by paying that particular amount, herealizes that he was cheated.

Win 7 Antivirus 2012

Here in this article we are going to know which files Win7 Antivirus has copied to your computer, what changes have been made in theregistry and so on.

Remove Associated Files
Remove Associated Registry Entries
Use a Spam Fighter
Clear Temporary Folders
Delete Web History & Temporary Internet Files

Click Here to Download Win 7 Virus Removal Tool

RemoveAssociated Files

This fake antivirus copies bulk files to your hard diskin different locations. In many cases, following files and folders were foundinfected by this virus. Delete all the files from the following parentfolders in order to remove Win 7 Virus instantly:

Temporary Folders - Windows Explorer

C: >> Program Files >> Win 7 Antivirus 2012
C: >> Users >> <Your User Name> >> AppData >> Local >> OPRSK
C: >> Users >> <Your User Name> >> AppData >> Templates >> U3F7PLATESU3F7PNVFNCSJK2E86ABFBJ5H
C: >> Users >> <Your User Name> >> LocalSettings >> Application Data >> OPRSK
C: >> Users >> <Your User Name> >> LocalSettings >> Application Data >> U3F7PLATESU3F7PNVFNCSJK2E86ABFBJ5H

Usea Spam Fighting Program

To remove Win 7 Virus instantly, use a spam fightingprogram. Download Spam Fighter and install it. Follow the on screeninstructions and you will instantly get rid of said virus.

RemoveAssociated Registry Entries

In addition to the above mentioned files, severalregistry entries are made by Win 7 Virus. Delete all of them in order toresolve your issue.

HKEY_CURRENT_USER >> PEZFILE
HKEY_CURRENT_USER >> Software >> Classes >> PEZFile

In all the registry paths given below, delete the string called ”Default” :

HKEY_CURRENT_USER >> Software >> Classes >> PEZFile >> Shell >> Open >> Command

HKEY_CURRENT_USER >> Software >> Classes >> .exe >> Shell >> Open >> Command

HKEY_LOCAL_MACHINE >> Software\Clients >> StartMenuInternet >> IEXPLORE.EXE >> Shell >> Open >> Command

Also delete:

HKEY_LOCAL_MACHINE >> Software >> Microsoft >> Security Center : Delete the string named “AntivirusOverried”
HKEY_LOCAL_MACHINE >> Software >> Microsoft >> Security Center : Delete the string named “FirewallOverride”

ClearTemporary Folders

Delete all the files stored in the temporary folders.This is because Win 7 Antivirus copies its files to your temporary locations.

Disk CleanUp

Click Start,point to All Programs. Select Accessories, System Tools and click DiskCleanUp.
Choose your Windows installation drive, for example,drive C.
Click OKbutton and follow the on screen instructions.
Alternatively, you can delete the files stored in thefollowing temporary directories:
C: >> Windows >> Temp
C: >> Users >> <Your User Name> >> AppData >> Local >> Temp
This will remove Win 7 virus instantly from your computer.

DeleteWeb History & Temporary Internet Files

Delete the web history, web cache and temporary internetfiles using Internet Explorer. First open it. Click Tools | Delete BrowsingHistory. Review the items for cleaning and click Delete button.

Resolve Error 53 in PC

2012-01-30T22:40:00.000-08:00

When runtime error 53 starts appearing on a PC itrestricts the people from performing certain tasks. Preventing furtheroccurrences becomes simple if the user investigates what exact factor iscausing that particular error. It becomes pretty easy if the actions are taken asearliest as possible.

Error53: “File Not Found (DLL File Name)”

Solutions:

Uninstall Programs Installed Prior to the Runtime Error
Move Specified DLL File to the System32 Folder
Reregister Error Causing DLL File
Scan the Registry Database
Reboot with Safe Mode Option

UninstallPrograms Installed Prior to the Runtime Error

If you have installed a program prior to the error 53,then uninstall it. It might have installed older versions of Dynamic LinkLibrary (DLL) files. To resolve error 53 in PC, do the steps given below:

Click Start,select Control Panel. Then click Programs | Uninstall a Program.
Select the faulty program and click Uninstall button.

MoveSpecified DLL File to the System32 Folder

At the end of the error a DLL file would be mentioned.If the file path is other than the below mentioned, then do the steps givenbelow:

Open My Computer.
Open the root folder where the mentioned DLL file ispresent. Right click the file, select Copy.Then browse C:\Windows\System32 and click Edit| Paste.

ReregisterError Causing DLL File

Each DLL file is registered in your system registrydatabase. If the registry entries belonging to any DLL file are not present orif they are incorrectly modified, then runtime errors start arising. Resolveerror 53 in PC by reregistering the DLL file shown in the error message:

Click Start,point to All Programs | Accessories.
Right click CommandPrompt and select Run asAdministrator.
Type the following command:

RegSvr32 <DLL File Name>

Exit

Shutdown /R

Scanthe Registry Database

The registry database of your computer containsimportant system configurations and data stored by installed applications. Whenthe information stored in the registry cannot be retrieved because it’sdeleted, you start getting error 53. Scan the registry using a Registry Cleanerand fix all errors and problems that reside in it.

Rebootwith Safe Mode Option

The Safe Mode with Networking option of your computermake it possible to boot Windows without loading any startup programs andservices. Choose it and reboot Windows to resolve error 53 in PC. Restart themachine. Press F8. Select Safe Mode with Networking and press ENTER.

Steam Error: This Game is Currently Unavailable

2012-01-29T05:18:00.000-08:00

Value Corporation has developed Steam fordistributing games and media of all categories of developers including smalland large software developers. Steam makes a user friendly environment whereusers can download games, chat and use other community features. Additionally,Steam take cares that all your games are up-to-date.

Unfortunately, users are facing an error with the following description: “SteamError: This game is currently unavailable” whenever they try to play a game oftheir choice. This article goes through the various instructions used forgetting rid of this annoying message.

1. Update DirectX, Visual C++Redist and PhysX

2. Delete ClientRegistry.blob File

3. Remove ReadOnly Mark for Steam Files

4. Update Display & SoundDrivers

5. Try Compatibility Mode

6. Prevent Clash with DataExecution Prevention and Firewall Software

7. Fix your Registry

UpdateDirectX, Visual C++ Redist and PhysX

Before you start playing games using Steam,make sure that your computer is up-to-date. The basic tools like MicrosoftDirectX, Microsoft Visual C++ Redistributable and PhysX (for Nvidia users) mustbe updated on a regular basis so as to avoid “Steam Error: This game iscurrently unavailable”.

Updates Download Links:

MicrosoftDirectX

MicrosoftVisual C++ Redistributable

Nvidia PhysX

DeleteClientRegistry.blob File

There is a file called ClientRegistry.blobstored inside the Steam program directory. If this file is having any problems,it may result in “Steam Error: This game is currently unavailable”. The solutionis to either rename or delete this file.

1. Completely exit Steam from itssystem tray icon.

2. Open My Computer.

3. Double click C:\Program Files\Steam.

4. Right click the ClientRegistry.blob file and select Delete option. Confirm it by clicking Yes.

RemoveReadOnly Mark for Steam Files

The Steam program files can be set toReadOnly attribute thus leading problems in modifying the data andconfiguration files. Remove the ReadOnlymark for the Steam program files.

1. Open My Computer.

2. Double click C:\Program Files.

3. Right click the Steam folder and select Properties.

4. In the new dialog box, deselectReadOnly option from the General tab.

5. Click Apply | OK.

UpdateDisplay and Sound Drivers

In many cases, users are getting “SteamError: This game is currently unavailable” message because their display andsound drivers are outdated. In such cases, downloading and installing theupdates has resolved the issue.

1. Download a Driver Updatingprogram such as Driver Revivier. Install and run it. Tip: Download/Update Drivers Here.

2. Start for the latest driverupdates and install them immediately.

TryCompatibility Mode

Try to run Steam in Compatibility Mode forfixing “Steam Error: This game is currently unavailable”.

1. Right click the Steam shortcut on your desktop, select Properties.

2. Click Compatibility tab, mark Runthis program in compatibility mode for as checked.

3. Select earlier version ofWindows operating system and click Apply| OK.

PreventClash with Data Execution Prevention and Firewall Software

Most often Data Execution Prevention (DEP)and your Firewall software prevent Steam from downloading or playing certaintypes of games. To overcome this issue, make sure firewall is turned off andSteam is being excluded from the DEP protected programs list.

1. Right click My Computer, select Properties.

2. Click Advanced System Settings.

3. Under Performance frame, click Settings.Then click Data Execution Prevention.

4. Select Turn on DEP for all programs and services except those I select,click Browse, locate Steam launcherfile.

5. Then click Apply | OK | OK.

6. Click Start, type Windows Firewallwith Advanced Security in the Search box and press ENTER.

7. Right click the same optionfrom left side panel and choose Properties.

8. Make it turned off from Domain Profile, Private Profile and PublicProfile tabs.

9. Click OK and restart Steam.

Fixyour Registry

The Steam configurations stored in theregistry can be corrupted. Thus scan the registry for such errors and fix theminstantly. Download a good System Utilities/Registry Cleaner software such as RegInOut (http://www.reginout.com).

Troubleshoot Error 619

2012-01-29T02:14:00.000-08:00

For some reasons your computer may show error 619 whiletrying to connect to the internet. Error description may pop up telling aconnection to the remote computer could not be established thus the relevant portwas closed. It’s basically a Virtual Private Network (VPN) error.

Solutions:

Delete Existing Adapter and Reconfigure the Settings
Turn your Antivirus & Firewall Programs Off
Delete Temporary Internet Files and Web History
Reboot the Client PC
Stop Additional VPN Clients Running in Background

DeleteExisting Adapter and Reconfigure the Settings

The network adapter shown in the Network and SharingCenter may have technical problems. Delete it and re-setup the networkconfigurations with the help of your internet service provider. To troubleshooterror 619, do the steps given below:

Click Start,select Control Panel.
Click Network andInternet and then Network andSharing Center.
There is a link called Change Adapter Settings displayed on the left hand side panel. Justclick it.
A new page will appear showing the list of all adaptersplugged-in to the computer. Right click the active adapter and select Delete option. If asked for confirmation,continue the delete process.
Restart your computer.
Make a phone call to the customer care department ofyour internet service provider and ask necessary steps to reinstall yournetwork adapter.

Turnyour Antivirus and Firewall Programs Off

Both the antivirus and firewall protections shall beturned off temporarily. Thereafter if you do not get error 619, then there’smust be conflict between these protections and your network connection. In suchcase, try switching to another product.

The disable option can be found in the system tray iconof your antivirus. In case of Windows Firewall, hit Start button, type WindowsFirewall with Advanced Security and press ENTER. When it opens, right click the same from the left side paneland select Properties. Make itdisabled and click OK. This willtroubleshoot error 619.

DeleteTemporary Internet Files and Web History

The temporary internet files, web history and webbrowser cache plays a significant role in the network connectivity of yourcomputer. Due to corruption in any browser related files, you may start gettingsuch error messages. To troubleshoot error 619, download a System Cleanerapplication and clean-up your computer.

Rebootthe Client PC
May be rebooting your client computer workstroubleshooting error 619. Do it and try establishing a new connection.

StopAdditional VPN Clients Running in Background

A single VPN Client should run for the smoothfunctioning of your computer. Otherwise you face couple of problems including error619.

The suggestion is to check whether multiple VPN clientsare running or not. If there are two or more clients running simultaneously,then stop all of them and keep only one VPN client running on your PC. Contactyour ISP for more detailed information.

Click Start,select Run. Type Services.msc and hit ENTER.
If two or more VPN Clients are running, then right clickand stop them.
Close the window.

Resolve Error 633

2012-01-28T22:29:00.000-08:00

Sometimes the dial-up internet users face Windows error 633. Eventhough the phone lines are okay, a message pops up on the screen telling themodem is already in use. You cannot connect to the internet.

Install Compatible Modem Drivers
Re-plug your Modem
Uninstall Incompatible Software Programs
Modify your Registry
Delete Telephon.ini
Reset Internet ExplorerSettings
Clear Web Cache Contents

InstallCompatible Modem Drivers

Error 633 can pop up if the modem drivers are notinstalled or if they are incompatible with your computer configurations.Reinstall appropriate driver versions can resolve error code 633 in Windows 7, Vista and XP.

For getting the latest driver updates, download a DriverUpdater program or otherwise visit the website of your Modem Manufacturer or InternetService Provider.

Re-plugyour Modem

If the modem is not properly plugged-in, then sucherrors are shown. As a solution to resolve 633 error code, it would be advisable toun-plug and re-plug your modems.

UninstallIncompatible Software Programs

Dozens of programs may have been installed on yourcomputer. Some of them like Synchronization programs and Palm Desktop software causeincompatibility issues thus leading this error. Uninstall such programs to getrid of this problem.

Click Start,select Control Panel | Programs | Uninstall a Program.
Select any newly installed program or Synchronizationsoftware or Palm Desktop, if installed.
Click Uninstallbutton and follow the wizard on your screen. Restart the computer to resolveerror 633.

Modifyyour Registry

The Telephony section of your registry may be modifiedimproperly. Undo the wrongly altered registry portions to resolve problem 633.

1. Click Start,select Run, type RegEdit and press ENTER.

2. Browse the following registry path from the left sidepanel:

HKEY_LOCAL_MACHINE\Software\

Microsoft\Windows\CurrentVersion\

Telephony\Providers

3. There is a string called ProviderFileName0. Double click it and replace its value withTSP3216L.TCP

4. Close Registry Editor.

5. Install a Registry Scanner program and scan for otherregistry errors. Fix them instantly.

DeleteTelephon.ini

The file Telephon.ini usually located inC:\Windows\WinSxS can be badly configured. Move it to the Recycle Bin and checkwhether the error exists.

If you do not find this file in the above mentioneddirectory, then open My Computer,press F3 and search it throughWindow Search feature.

When you are done, press Windows Key + R, type Tapiini.exe and press ENTER.

ResetInternet Explorer Settings

The changes you have made to Internet Explorer should berestored to the default state in order to resolve error 633. Do the steps givenbelow:

Open InternetExplorer.
Press Altkey, select Tools | Internet Options.
Under Advancedtab, click Reset, confirm it andrestart the browser.

ClearWeb Cache Contents

We may experience error 633 if the files stored in theweb cache folder are corrupt. Simply clear the web cache by using the SystemCleaner of a PC Optimizer software.

Tip: Fix Error 633 Instantly With Intel Software Partner Repair Tool

Disk Read Error

2012-01-26T08:05:00.000-08:00

Disk read error is a pre-boot error which can arise beforeyour operating system starts booting. The error description may ask you torestart the machine by pressing Ctrl + Alt + Delete. But the most annoyingthing is that the next time your computer is started, the same screen appearsno matter you have selected Hard Disk or CD ROM as your First Boot Device.

In this article, we are going through a few solutionsthat are frequently used to deal with the said error.

1. RepairMaster Boot Record
2. FixRegistry Records
3. Use DifferentIDE Cable
4. TryDifferent Hard Disk
5. SetBIOS Defaults

RepairMaster Boot Record

The Master Boot Record is placed on storage devices likeyour hard disk which holds the partition table. Its ultimate objective is to bootstrapyour operating system by storing descriptions of partitions made in a specifichard disk drive.

Disk Read Error may arise because of corrupted MasterBoot Record (MBR). By repairing it, the problem might be fixed.

1. Restartthe computer by pressing Ctrl + Alt + Delete.

2. InsertWindows installation disc.

3. SetFirst Boot Device to your CD ROM and Second Boot Device as your Hard Disk. Savethe settings and restart the machine again.

4. Whenasked to press any key, follow it.

5. Onthe first page, click Install Now.

6. Selectyour language, time and currency format and keyboard & input methods. Thenclick Next.

7. ClickRepair your computer link and in newdialog select Use recovery tools thatcan help fix problems starting Windows. Select the problematic version ofWindows and click Next.

8. ClickCommand Prompt link, type thefollowing commands one by one:

Diskpart

Select Disk 0

List Volume

Exit

<Your Drive Letter, For example,J:>

CD Boot

Dir

BootSect /NT60 SYS /MBR

Exit

9 Finally,click Shutdown.

10. Restartyour computer.

FixRegistry Records

System Registry is a complex database that contains differenttypes of information. Because of corruption in the records of the registry,Disk Read Error starts appearing. Start full scan using a Registry Cleaner software. Repair these corrupted registry entries from the scan results.

UseDifferent IDE Cable

IDE Cables

The word IDE is an acronym for Integrated DriverElectronics. It is frequently used to connect hard disk and CD ROMs with themotherboard.

When the IDE Cable is not working properly, Disk ReadError starts arising. Try a different IDE cable and restart your machine.

Try DifferentHard Disk

A Dying Hard Disk

Bad sectors in your hard disk can also cause Disk Read Error.Temporarily, remove your hard disk, connect the hard disk of your friend and makeit as a Primary Hard Disk and the First Boot Device. If the computer worksfine, then the problem lies in your own hard disk and it is failing.

SetBIOS Defaults

Apply default BIOS settings and restart your machine. Thereis a possibility that your BIOS settings are improperly changed leading DiskRead Error. Set them to their defaults by following the steps given below:

1. Restartthe machine.
2. PressDelete or F2 key repeatedly.
3. ClickExit menu, select Load Optimum Defaults. Press ENTER.
4. Thesystem will automatically restart and no error will appear when it will start.

Tip: Run Scan With RegInOut System Utilities to Fix Disk Read Error

Sims 3 Error Code 12

2012-01-24T22:35:00.000-08:00

Sims 3 is a very interesting game where you control littlepeople and help them maintaining their social lives. Kids inside the game go toschool and youngsters go for work- all under your control. Hoever, sometimes users encounter some errors while playing the game.

Sims 3 error code 12 has started occurring after theintroduction of ‘World Adventures’ expansion pack. Players often complaint thiserror when they try to save their session. It appears when one hits the ‘Save’button and waits patiently for the operation to finish.

Download Sims 3 Error 12 Fix from From Intel Site ...

Pause and Save theSession with a Different Name

Pause the game, click SaveAs instead of Save button. Typea new name and confirm. It has worked for a number of users. However, there isno technical reason for it.

Remove ProblematicCustom Contents

Delete Custom Contents

The recently added Custom Contents may be not functioningwell. Remove all problematic custom contents in order to solve Sims 3 errorcode 12.

Close The Sims 3.
Open MyComputer, browse any of the following directories:
C:\Program Files\Electronic Arts\The Sims 3\GameData\Mods
C:\Users\<User Name>\My Documents\ElectronicArts\The Sims 3\Mods
Press Altkey, click Edit | Select All. Press Delete key of your keyboard and confirm by clicking Yes.

Disable DataExecution Prevention

Data Execution Prevention (DEP)

Make an exception in the working of Data ExecutionPrevention (DEP). Add Sims 3 to its exception list and restart it to fix Sims 3error 12. Here’s how:

Close The Sims 3.
Right click MyComputer desktop icon, select Properties.
In the new page, click Advanced System Settings. (On the left hand side corner)
In the new dialog, Advanced tab shall be opened automatically. From Performance frame, click the Settings button.
In the parent dialog, click Data Execution Prevention tab. Select Turn on DEP for all programs and services except those I select option.
Click Add,browse any of the following file depending on your system configurations:

For 32 bit Users:
C: -> Program Files -> Electronic Arts -> The Sims 3 -> Game-> Bin -> TS3.exe
For 64 bit Users:
C: -> Program Files (x86) -> Electronic Arts -> The Sims 3 ->Game -> Bin -> TS3.exe

7. Click OK| OK.
8. Now restart the game.

Correct RegistryProblems

Registry configurations are responsible for the smoothfunctioning of an installed game. When these registry keys are improperlychanged, deleted or renamed, you started getting Sims 3 error code 12 andsimilar errors.

The solution is easy. Download a Registry Cleaner software,scan your PC and fix all errors that exist. Restart the PC when you are done.

Uninstall andReinstall the Sims 3

There can be problems with the installation of game that arecausing Sims 3 error code 12. Uninstall and reinstall it to overcome thisissue.

Control Panel

1.      Click Start,select Control Panel. Click Programs and then Uninstall a Program.

2.      Select TheSims 3 and click Uninstallbutton. Follow it and restart your machine.

3.      Download a fresh setup online and reinstall itonce again.

Download Sims 3 Error 12 Fix from From Intel Site ...

SWTOR Freezes Repeatedly !

2012-01-23T02:48:00.000-08:00

Star Wars: The Old Republic (SWTOR) freezes at random intervals. Itgets unresponsive for a few minutes to half an hour. Thus it becomes extremelyhard to enjoy SWTOR due to poor system performance.

If you are experiencing SWTOR freezing, then you have come atthe right place. You’ll get several techniques useful for fixing this problem.

Update your Computer
Apply Window Mode
Reregister Associated Program DLL Files
Extreme Gaming Performance
Defrag your Registry

Update your Computer

It is important to keep your PC up-to-date for experiencing maximumgaming performance. Update Microsoft DirectX, Microsoft Visual C++Redistributable, download Windows Updates, latest driver updates and download patchesreleased by the game manufacturing company.

Open your web browser and visit Microsoft DirectX Download Page. Click the Download button, save the file in your Downloads folder. When the process isfinished, double click it and follow the installation instructions.
Visit Microsoft Visual C++ RedistributableDownload Page. Download the setup and install the program.
Click Start,point to All Programs and select Windows Update. Click the button Check for Updates; wait till the updatescan process is finished. Update and install all the important updatesavailable online.
Download a Driver Updater. program. Start scanning for the latest driver updates. If newversions are available, then download & install them immediately.
Visit the SWTOR official website. If new updatesand patches are available, then download-install them.

DirectX Download Page - Microsoft.com

Apply Window Mode

SWTOR freezes are experienced if the full screen is applied.Change the game settings by modifying file shown below.

Modifying Client_Settings.inf File

Exit SWTOR. Open My Computer.
Double click C:\Users\<Your User Name Here>\AppData\Local\SWTOR\Settings
Double click CLIENT_SETTINGS.INI file. It shall open with Notepad.
Search for a setting FullScreen. If the default value is set to True, then replace it with False.
Click File | Save and then Close.

Reregister AssociatedProgram DLL Files

There are two DLL files namely MSVCR90.dll and NV4_MINI.dllwhich may be affecting Star Wars: The Old Republic performance. Reregister themusing Command Prompt to resolve SWTOR freezes.

Click Start,point to All Programs | Accessories.
Right click CommandPrompt, select Run as Administrator.
When Command Prompt is opened, type the belowcommands:
RegSvr32 MSVCR90.dll
RegSvr32 NV4_MINI.dll
Exit

Extreme GamingPerformance

Optimize the services that are performed without yourattention. Make Extreme Gaming Performance.

Download a Services Optimizer software.Install and run it.
Click ServicesManager tab on the left hand side.
Click the button Optimize Services, select GamingComputer (Extreme Performance) and click Apply.
Restart Star Wars: The Old Republic.

Defrag your Registry

It is found that SWTOR freezes because users occasionallydefrag your computer registry. Analyze it for possible fragmentation and thenstart the defragmentation procedure. For this purpose, use a Registry Defragprogram.

How to Transfer Programs from One Computer to Another

2012-01-22T23:42:00.000-08:00

After buying a new computer a lot of people want to transfertheir programs & files from the old to the new computer. But the onlyproblem is that they have a number of programs installed and family photoalbums, music & other stuff stored that they don’t want to lose whilemaking the transfer process quicker. Of course, it is not a simple task. WhileI was searching for a solution, I came across PCMover- an automatic file transfersoftware.

PCMover
(Transfer Programs & Files from One Computer to Another)

A file transfer software can be used for two purposes.Firstly, for making the transfer of all/ selected programs, applications andgames. Secondly, for transferring your documents, music, videos, & otherstuff without hassle. The main advantage of using such file transferring softwareis that there is no need to manually check-out the things once you give commandto that program. In other words, by simply just selecting programs and files, theentire task will be done without needing your physical presence and attention.On the other hand, as all of us know selecting, copying and pasting data fromone computer to another waste a lot of time. Additionally, in the manualtransfer, there is no guarantee that the transferred programs would workbecause transfer of associated registry information is impossible.

We’ll here see how to transfer programs from one computer toanother, obviously using an automatic file transfer software.

Select a TransferMedium:

Before going through the actual procedure, you need to have anyof the following components so the actual transfer procedure can take place.

· An External Hard Disk

· CD/ DVD Disc

· A USB Drive

· Local Area Network (LAN)

· EasyTransfer Cable

How to Transfer Programs from One Computer to Another?

If you have decided the transfer medium, do the steps givenbelow:

Download PCMover from its official website.
Double click the downloaded file and continuewith its installation. On successful completion, reboot your computer.
Make sure no other programs are running. Open PCMover by double clicking its desktopshortcut.
PCMover Professional will open in a wizard-basedform. In the first welcome page, click Next.
Read the important information given in the nextpage that appears. To confirm you have read it, check-up the box labelled I have read and understand this message.Then click Next.
In the next page, there will be 3 options-Migration, Windows 7 Upgrade Assistant and Image Assistant. Since you have totransfer programs and files to a new computer, select the first option that is Migration. Click Next.
It will ask you whether it’s a new or oldcomputer. Choose Old Computer optionand click Next.
Select the medium of transfer as you decidedearlier. The simplest medium is using a USB Cable.
Depending upon the medium of transfer youselected, make sure that the appropriate cable is connected, CD/ DVD isinserted or the network connection is established. Then click Next to continue.
Click Nextagain.
The wizard will start searching for the applicationswhich can be possibly transferred. Select those programs that you have totransfer to the other PC and continue it till the end. Steps vary according tothe transfer medium you had selected.
When you are finished, let’s move to your newPC! Install PCMover on your new PC and run it.
Repeat the above Steps 3-6.
Select NewComputer option and click Next.
Again, click Next without downloading the advertised products. Continue thewizard your own.

Error 132 Fix

2012-01-21T17:40:00.000-08:00

Imagine you returned to the home from a very hard and lousy dayat school, then sit on a chair to play World of Warcraft but it failed to loadwith error 132. How frustrating it would be?

Yes, it happens. It has happened with a lot of people. Theygot this error with the following description. This article is designed withthe objective of helping such users in getting rid of the error.

Error 132: “Theapplication has encountered a critical error. Fatal exception.”

Solutions

Use OpenGL Mode Feature
Prevent your System from Overheating
Resolve Problems with your Memory
Check WoW Settings & Configurations
Exit Background Programs

Use OpenGL ModeFeature

OpenGL stands for Open Graphics Library. It is widely usedin modern games. Try running WoW with the OpenGL Mode and check whether error132 still arises or not.

File Properties

Click Start, point to All Programs | World of Warcraft.
Right click the World of Warcraft shortcut and select Properties.
In the File Properties dialog, you’ll be in the Shortcut tab. In the Target box, add –OpenGL after the file path is end.
Click Apply| OK.

Prevent your Systemfrom Overheating

Some parts of your computer, like processor, sound card orgraphics card, are overheating that’s why WoW fails to load with error 132. Toknow exactly which part is overheating then do the tests given below:

Click Start,type Device Manager in the Search box. Press ENTER.
First disable your video card, wait a fewminutes and try running the game. If it fails to load, then disable your soundcard and try running it again.
If the issue is not resolved then turn yourcomputer off, press F2 or Delete key, enter into CMOS Settings,check the processor temperature. If it is overheating then clean all the fansfixed inside your CPU and take appropriate measures. If you are a laptop user,then consider buying a laptop cooling pad.

Resolve Problems withyour Memory

Perform certain memory tests with your Random Access Memory(RAM). There is a tool called Windows Memory Diagnostic freely available at Microsoft.com . Download it,check the memory and if required replace it. You’ll no longer get WoW error132.

Check WoW Settings& Configurations

The World of Warcraft settings are located in your systemregistry. Because of certain reasons, they might be changed in wrong way thusshowing WoW error 132. Download a Genuine Registry Cleaner. Check for registryerrors and fix them instantly.

Exit BackgroundPrograms

While running WoW, make sure that no other programs arerunning on your computer. This is important to prevent WoW error 132 in case of insufficientmemory issues.

Close Background Programs

You can fix this error here: error 132

Windows 8 Developer Preview - An Insight

2012-01-20T21:55:00.000-08:00

Windows 8 is a combined desktop, laptopand tablet operating system. At this period of time, a Pre-Beta version isavailable for both 32 bit and 64 bit machines. If you are interested in takingthe flavour of all new features in Windows 8 you have come at the rightplace.

The download links for Windows 8 are given at the end of this article before the Screenshots section.

Start Screen

What's New?

Metro Style Touch User Interface

Ribbon Interface
Redesigned Progress Bar
Reduced Boot Time
Strong Like Bull
Picture Password
Control Panel in a New Form
Desktop
Internet Explorer 10
Stock Updates
Weather Updates
Alarms
Task Manager

Metro Style Touch User Interface

Sample Metro Style Application: Remote Desktop

Windows has entered in to the journey ofMetro. A new Metro style interface has been added which is designed for touchscreens, pen inputs, mouse and keyboards. It is very similar to the WindowsPhone's Metro interface. It's a giant screen which replaces the icons while living thetitles.

Live Tiles, New Programs & Games

The traditional Start Menu is replacedwith a new Start screen that occupies the entire area of your monitorscreen. The most important programs and their live updates are shown in Tiles.

Memories

By simply opening the Start screen,you'll get information about the US Stock Updates and Weather. Windows 8installs dozens of new programs that provide News, RSS Feeds, Maps, Twitter& Facebook Updates all just through a single click. You can set an alarm so thatyour PC will remind you at the specified time period. The Memories applicationis your life book where you can make albums of the photos of you and your lovedones.

A Game in Metro Style Interface

There are several new games added inWindows 8. Zero Gravity, Tile Puzzle, Bacterium, Word Hunt and much more! Allof them can be accessed through the Start screen.

Ribbon Interface

Windows Explorer

The traditional Menu and Sub Menu based Windows are replaced with the new Ribbon interface. As you know, the Ribboninterface provides access to all required features and functions through thepicture based icons. It saves the time required to search commands and abeginner can easily understand the functionalities of the Windows operations.

Redesigned Progress Bar

File Copy Progress

The progress bar is shown during severaloperations. The redesigned progress bar consists of a chart that not only showsthe file copying/ moving progress but also the speed of that operation.

Reduced Boot Time

Unlike the earlier versions of Windows,Windows 8 loads and shuts down much faster. Boot screen, log-on screen andshutdown screens are attractively redesigned.

Strong like Bull

Regarding the computer performance,Windows 8 is much ahead than the earlier versions of Windows. It runs well withvery little lags and rare crashes. The new Metro User Interface is alwaysresponsible to your commands thus making Windows 8 strong like a bull!

Picture Password

Windows 8 has a new cool feature calledPicture Password where you pick your favourite photo and draw gestures on it. Whatto tap? Well, you can tap your head, nose, neck or whatever you want.

Control Panel in a New Form

Control Panel

The Control Panel is converted into aMetro style interface which is easily accessible from the Start screen. SinceI'm not a big fan of the redesigned Control Panel, I have restored it to theoriginal appearance.

Internet Explorer 10

Internet Explorer 10

Windows 8 comes with the major release ofInternet Explorer. You believe or not; it is much more than just a simple webbrowser which plays a major role in a backend support for Metro start screen.Like other Metro styled applications, Internet Explorer 10 can also be used inthe full screen browsing mode.

Twitter & Facebook Apps

Tweet @ Rama

The metro styled Socialite and Tweet @Rama applications keep you updated about the Twitter and Facebook updates. InTweet @ Rama, Timeline is shown on the left hand side where you see updatesfrom others and you can tweet others through the Tweet box provided on theright hand side.

RSS Feeds

Updates from your favourite websites areshown in the new Headlines application. On a metro style application, you'llcome to know what new posts & articles are published on your favouritewebsites and blogs.

Stock Updates

Stocks

The new Stocks application gives marketupdates for the investors of US Stock Exchanges. You can get stock updates ofDow, NASDAQ, S&P 500 and MSFT stock exchanges.

One interesting thing is that you neednot to open that application to get this information! Once you open the Startscreen, the live updates will appear on your desk.

Weather Updates

Weather Updates

Windows 8 has the ability to gatherweather information. If you are more concerned about your loved ones who residein other regions, you can choose to display weather information of multipleregions.

Alarms

Alarms

Are you sleeping while making your PCturned on? If so, this feature is for you. You can specify a Date-Time so thatyour PC will work as an Alarm Clock.

Task Manager

Task Manager

The Task Manager in Windows 8 is free from unnecessary functions. As default, when you open it, there are no tabs but only opened programs list is shown. You can end any program as usual; but if you require to know detailed information like services, startups & users, then you can click on More details.

Free Download Windows 8

Screenshots:

Taskbar

Desktop

Desktop with Date-Time

User Files

Recycle Bin

Feeds

Maps

Drive Optimizer (Previously known as 'Disk Defragmenter')

Internet Explorer 10 (Without Metro Interface)

Touch Keyboard

Microsoft Paint

System Information

Task Manager (Detailed)

Computer

Windows Media Player

WordPad

XPS Viewer

Calculator

Ubisoft Game Launcher Error

2012-01-18T22:43:00.000-08:00

An error may occur every time you start Ubisoft game.The game will fail to load. There are different types of solutions. Some of these are explained in this article.

Alter Hosts File
Reinstall Game Launcher File
Change Game Configurations
Delete Registry Junk
Exclude from DEP

Alter Hosts File

The Hosts file contains certain configurations which areneeded to be altered in order to fix Ubisoft game launcher error.

Open My Computer.
Double click: C:\Windows\System32\Drivers\Etc
Right click the Hosts file and select Open With | Notepad.
If you see the following line, then delete it:
<Some IP Address> static3.cdn.ubi.com
Click File | Save.

Reinstall Game Launcher File

Because of problems with the game launcher installation files,you may see Ubisoft game launcher error. To overcome it, clickhere and download the launcher installer. Run it and install it on yourcomputer.

Change Game Configurations

There is a file called ConvictionUserPC.ini. Open it usingNotepad and change the game configurations as said below. Ubisoft game launchererror will not occur again.

Open My Computer.
Press F3 for Search and type ConvictionUserPC.ini and press ENTER.
From the search results, right click this file and select OpenWith | Notepad.
Click Edit | Find.
Type FullScreenViewPortX/Yand click Find Next.
When you get the above string, enter the appropriate ScreenResolution you have set to your desktop.
Click File | Save.

Delete Registry Junk

The information stored in the registry matters a lot howyour games work. Ubisoft game launcher error is shown if the registry informationis improperly modified. Delete junk registry entries and reinsert the propervalues to resolve this issue.

Download a Registry Cleaner and PC Optimizer.
Start a full scan. See the scan report and if errors arefound then fix them immediately.

Exclude from DEP

DEP stands for Data Execution Prevention. Exclude Ubisoftgame launcher file from it so as to prevent runtime errors.

Click Start, right click My Computer and select Properties.
Click Advanced System Settings, then Settings (Performance frame).
Click Data Execution Prevention tab.
Select the second option Turn On DEP for all programs andservices except those I select.
Click Add and locate the following folder.
C:\Program Files\Ubisoft\GameLauncher\
Add UbisoftGameLauncher.exe and then click OK | OK.

Error 619 Solution in Easy Steps

2012-01-13T06:51:00.000-08:00

While establishing a new connection to the VirtualPrivate Network Server, error 619 may suddenly occur. There can be differentreasons behind it. This article is a detailed study that shows reasons behind this problem and several solutions used to fix it.

VPN Error 619

Restart the Client Computer
Antivirus or Firewall Program is Blocking Access to VPNPorts
Two or More VPN Clients are Running
Reset VPN Configuration Settings
Fix your Network Registry Settings

Download Error 619 Repair Tool From Intel Site ...

Restartthe Client Computer

Restarting the client computer is a standard repairprocedure. Mostly it works to fix error 619. Do it and check whether the error appears or not.

Antivirusor Firewall Program is Blocking Access to VPN Ports

The antivirus and firewall program installed on yourmachine may be blocking access to the Virtual Private Network Ports. Try todisconnect both these programs to fix error 619.

Right click your antivirus program, select Disable Protection or similar option.
Click Start,select Control Panel | System and Security | Windows Firewall.
On the left hand side, click Turn Windows Firewall On or Off.
Select Turn OffWindows Firewall option from both the provided categories.
Click OK | Close.

Twoor More VPN Clients are Running

At a time, only one VPN Client should run so as tofunction properly. Otherwise concerning processes are interrupted with error619.

In your case, make sure that only one VPN Client isrunning. If there are many VPN Clients, then stop them either from theirTaskbar icons or using Services.msc.

Click Start,select Run.
Type Services.mscin the Open box.
Press ENTER keyof your key board.
Right click a VPN Client and select Properties.
In the new dialog, under General tab, select StartupType => Disabled.
In Services Status,click the Stop button.
Click Apply | OK.

ResetVPN Configuration Settings

There can be issues with the VPN Configuration Settings. Firstdelete them and then reset properly. The steps are provided below:

Click Start, select Control Panel | Network and Internet| Network and Sharing Center.
On the left side panel, click Change Adapter Settings.
Right click the adapter displayed in the new page andselect Delete. If there is only one adapter, the Delete option would be disabled.
Now, set-up the VPN Settings appropriately by contacting theappropriate official.

Fixyour Network Registry Settings

The registry settings are the most common reason behind error619. You may be getting this error because the registry is modified in anunsystematic manner. Fix it using a Registry Cleaner such as RegInOut below and simplyreboot the computer.

Download 619 Repair Tool From Intel Site ...

Download Brother Printer Drivers

2012-01-11T05:17:00.000-08:00

A Printer Driver is a computer program that converts theinformation to be printed to the form specific to a printer. For the smoothworking of printers manufactured by Brother Solutions Center, you’ll have todownload appropriate printer drivers.

Brother Printers

This article provides links to several drivers forBrother Printers. Before downloading a driver, be sure that you are downloadingthe appropriate driver which is specially designed for the printer model youare currently using.

Step1: Identify the Correct Printer Type and Printer Model

Identifying the correct printer model is very important. Onthe official website of Brother Solutions, you’ll find a variety of driversprovided for different printers. If you download an incorrect driver, technicalissues can arise in your computer and your printer may not work properly. Itmay fail to print the data or some other errors may arise.

Fortunately, the company has itself given sufficient informationwith pictures so there’s no worry about it.

First of all, select the type of printer you useto know how to identify the printer model:

Step2: Locate Appropriate Driver Type & Series

Now, you can locate the appropriate printer type andseries based on the printer model you identified above. The links are providedbelow:

After clicking the appropriate link, please do select theappropriate Series applicable.

Step3: Start the Driver Download Process

Finally, start downloading the actual drivers. Continue thesteps given below:

I assume that you have finished the above Steps 1 and 2.
Click the Downloadslink.
Under Select OSsection, choose the appropriate operating system and its versions you use. For instance,Windows 7 (64 Bit)
Under SelectLanguage section, choose the language you prefer, say, English.
Click the Searchbutton.
In the new page that opens, click Download & Information link under Full Driver & Software Package section.
After the file is downloaded, double click the setupprogram to start the installation. When you are done, please restart thecomputer.

Note: Makesure that your printer is connected before you start installing the driver.

To update drivers automatically click here.

PC Mover 2012 Review

2012-01-09T23:26:00.000-08:00

Laplink PC Mover 2012 is a consumer friendly PC Migrationsoftware. It is designed so that the process of migrating computer programs, documents,computer settings and user profiles from one computer to another becomesextremely easy.

Setting up a new computer has never been easier. All ofus setup our computer in different manner. We all have different settings fordifferent programs and games that we use. Traditionally, when we purchase a newcomputer, we have to reinstall all of our old programs & games and entersoftware licensing information (such as product keys or registration keys) and customizeits settings manually.

However, PC Mover 2012 has made this task very simple andless time consuming. You only require installing PC Mover on both your PCs, choosewhich programs to transfer and start the automatic process! It is the modernway of transferring your programs, files, system settings and user profiles toa new PC with just a few clicks. There is no hassle of reinstalling programs, feelingsoftware registration information or spending your valuable time.

PC Mover 2012 migrate the following and many other programsfrom your old PC to a new one:

Microsoft Office (Word, Excel, PowerPoint, Access,OneNote, Publisher and Outlook)
Computer Games
Music, Photos and Videos
Desktop Settings (Backgrounds, Themes and Icons)
Instant Messengers like Yahoo Messenger, GTalk andTrillian
Graphic Design Programs like Paint, Adobe Photoshop andCorelDraw
Web Browsers and their Settings (Bookmarks, Favourites, Extensionsand Toolbars)
Financial and Taxation Programs like Tally.ERP

QuickInstallation

The installation of PC Mover 2012 is very quick. Afterdownloading the file from the official website, the web browser or downloadmanager will ask you to run it. After confirmation, the setup program willstart downloading essential components like Microsoft .NET Framework and thenstart the actual installation procedure.

AutomaticTransfer of Programs, Games & Settings to your New PC

When you install and run PC Mover on your old computer, awizard will ask you to select some programs and games to transfer them to yournew computer. Then you have to install this program on your new PC and run it. Justfollow the same wizard and let it do this task automatically for you.

All the programs, games and user profiles that youselected earlier will be automatically moved to your new PC without hassle. Thereis no need customizing your new PC at all since all this work is automaticallydone for you.

AvoidBoring Installation & Registration Procedures

PC Mover 2012 makes it possible to avoid the boring andtime consuming program installation and registration procedures. Your work isonly selecting your favourite programs, games and user profiles and startingthe migration process.

UseNetwork, External Hard Disk, USB Drive, DVD or USB/ Ethernet Cables

The process of migrating stuff can be done throughseveral mediums. Local Area Network (LAN) can be used if you want to transfer thestuff via network connection. Otherwise there are several other options likeusing an external hard disk, a USB Drive, a DVD or USB/ Ethernet Cables. In caseyou do not have a Laplink cable, you can purchase it online.

UpgradeAssistant

If you do not wish to move your stuff anywhere but toupgrade existing version of Windows, then the Upgrade Assistant is there foryou! You can easily upgrade to the newer version of Windows (say, Windows 8Beta) without reinstalling your old programs or worrying about your documents& settings.

Get PC Mover 2012 with 10 % OFF Coupon Code (pcmoverspring2012) !

SpyEye Virus Removal

2012-01-09T07:16:00.000-08:00

SpyEye virus is a highly risky Trojan. Its main objective is to enter into a computer and steal users information and money.

It tracks various types of sensitive information, including banking information, Debit/ Credit Card information and money transfer websites log-in details that we provide while dealing with other eCommerce sites online. It then sends it to the Trojan makers so that they easily steal your money.

SpyEye Virus

A computer infected with SpyEye Trojan can be disinfected with appropriate steps. This article reveals several techniques used to remove this Trojan and make your computer clean and safe to use. Until and unless all the steps in this article are finished, you are recommended to avoid dealing on the internet.

1. Prevent SpyEye from Loading

2. Delete Associated Files

3. Re-Setup Registry Settings

4. Download Antivirus & Firewall Programs

Prevent SpyEye from Loading

The first essential step is to prevent SpyEye Trojan from loading at the computer startup interval. To do so, there are two methods, viz. use System Configuration or modify your registry.

For simplicity of the task, use System Configuration as below:

1. Boot your machine in the Safe Mode with Networking option. To locate the Boot Options screen, restart it and randomly press F8 key.

2. Click Start, select Run.

3. Type MsConfig and press ENTER.

4. System Configuration will open. Click Startup tab, deselect all items and click Apply.

5. Click Services tab, mark Hide all Microsoft Services checked, deselect all remaining items and click Apply | OK.

6. When you are done, simply restart your computer.

Delete Associated Files

There are some files stored on your hard disk which are associated with SpyEye Trojan. Delete them to clean your computer.

1. Click Start, then My Computer.

2. Delete all the below mentioned files:

a. C: | Cleansweep.exe

Note: Although .exe is given at the end, it is not a file at all; it’s a folder. It contains two malicious files namely Cleansweep.exe and Config.bin.

c. C: | Program Files | Spy Eye | SAVE

d. C: | Program Files | Spy Eye

e. C: | Program Files | Spy Eye | vclass.exe

f. C: | Program Files | Spy Eye | unins000.dat

g. C: | Program Files | Spy Eye | keyproc.dll

h. C: | Program Files | Spy Eye | vclass.hlp

i. C: | Program Files | Spy Eye | unins000.exe

j. C: | Program Files | Spy Eye | settings.dat

Re-Setup Registry Settings

SpyEye Trojan modifies your Windows registry so that your computer becomes insecure and transmission of sensitive data becomes easier. Reset the registry settings as stated below.

1. Click Start, select Run.

2. Type RegEdit and press ENTER.

3. Following are several registry entries. After locating them, you may found that their values are modified. Set-up the following values if the original value is modified.

a. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Zones -> 0 1409

b. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Lockdown_Zones -> 1 1406

c. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> WarnOnIntranet=0

d. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> EnableHttp1_1=0

e. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> WarnonBadCertRecving=0

f. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Zones -> 0 1609

g. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> ProxyHttp1.1=0

h. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Zones -> 0 1406

i. HKEY_CURRENT_USER -> Software -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> WarnOnPostRedirect=0

4. Click the Close button to exit Registry Editor.

Download Antivirus & Firewall Programs

Your computer is at risk because of several possibilities, viz. you may not have installed an antivirus, your antivirus is outdated or otherwise it failed to detect mentioned Trojan.

The best way I can suggest to get rid of this issue is to download powerful antivirus and firewall programs. Before starting, you must remove existing antivirus program and third party firewall protection, if any. The steps are:

1. Click Start | Control Panel | Programs | Uninstall a Program.

2. Select your existing antivirus program and click Uninstall.

3. Follow the wizard and restart machine when it finishes.

4. Do the same steps for your third party firewall program.

5. Download, install and run good antivirus and firewall programs.

6. Be sure to check whether automatic database updates is enabled.

Download SpyEye Special Protection !

Clean Social Media Accounts--Mypermissions.org Review

2012-01-09T05:40:00.000-08:00

Have you ever realized that how many apps you have authorized to receive your personal information and post automatically to your social media accounts such as Facebook? You will be amazed to know the number of apps that are working under the hood and you have no idea that how badly they might affect the reputation of your social networking account. In addition you may be compromising on your privacy.

Have you ever tried to clean up this mess from your profiles? Does that seem a daunting task? If you are nodding to these questions mypermissions.org is the web site that is here to help you manage your social media permissions. The web site provides one click solution to steer your social media apps in an easy way.

When I checked my Facebook account through this web site i was surprised to see that more than 50 apps were receiving my account information including the personal information. Similarly the Twitter account was loaded with numerous apps.

Sometimes we give access to web sites and apps then forget to manage the permissions that how that web site can interact with our personal accounts.

The web site presents an idea that you should start the year 2012 by taking 2 minutes to manage social media apps permissions.

In my view this web site is worth trying.

If you have liked this post, follow me on twitter (see on top right) and provide your valuable comments in the comment box below.

Evernote for Windows Phone 7-- User Review

2012-01-06T13:15:00.000-08:00

Evernote is my favorite note keeping app in Windows Phone 7. I also use the Evernote software on my PC. The best thing about it is that the entire application is well organized and its synchronization feature works wonders.

The time you update a note on your Windows Phone 7 (Mango) it is updated on your PC! Similarly if you create or edit a note it will be updated on your smartphone.

Another very useful feature of Evernote is that you can create notebooks which keeps your notes organized. Like on PC, the app for mobile works fast.

You can create large as well as small notes. If you do basic word processing and you are looking for some alternative to Microsoft Word, Evernote is the right program for you.

There is no risk of data being lost in case your PC or Smartphone gets corrupted. All of your data is stored in a cloud. You can access this data by downloading Evernote software on your PC or Phone. You will be asked to provide the email address with which you registered the program.

As you have created a new note/document you can email it from within the application.

On a scale of up to10 with the 10 being the excellent, I would rate Evernote for Windows Phone as 9.

You can download it from the official web site: http://www.evernote.com

Update IDT Audio Drivers

2012-01-06T07:12:00.000-08:00

IDT sound card users have to download and update compatible audio drivers. This article will provide you several links to find best drivers for your computer.

The official website of IDT Corporation is http://www.idt.com/. There you’ll be able to find the newest driver updates and download them free-of-cost.

The step to update IDT Audio Drivers is given below:

1. Download IDT HD Audio Driver:

· Windows 7:

http://drivers.freesoftz.com/sound-card/idt/56405-idt-hd-audio-driver-6.10.6222.0-for-win7.html

· Windows Vista and XP:

http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/HP-IDT-HD-Audio-Driver-51006162-61006162-for-XP-Vista.shtml

· Other Links:

http://drivers.softpedia.com/downloadTag/IDT+High+Definition+Audio+Driver

2. Run the downloaded file using a file compressing program, such as, Free 7 Zip File Manager.

3. Make sure that your speaker and sound card are connected. Close all other running programs, if any.

4. Follow the on screen instructions and continue the setup.

5. Restart the computer when you’re done.

Things to Remember:

Before you update IDT Audio Drivers, I recommend you making sure that following things are set-up:

1. Create a System Restore Point:

Using System Restore, create a new restore point so that if the installation fails in middle or something goes wrong, you can revert the changes and restore your computer immediately.

Click Start, point to All Programs | Accessories | System Tools. Click System Restore.

2. Turn Off your Antivirus:

Precaution is always better than cure. Many times, antivirus programs prevent you from installing certain programs or drivers thus the installation fails in middle. Thus I recommend you to disable your antivirus program as soon as you finished scanning the downloaded file.

3. Check whether Speaker and Sound Card are properly connected:

Ensure your speaker and sound card are properly connected and are turned on.

4. Close all Open Programs:

For the installation program to work properly, make sure that all open programs are closed.

Backupify Review--What is Backupify Social Media Backup

2012-01-06T05:37:00.000-08:00

Everyone with some logical thinking can easily understand the advantages of storing data in world class data centers managed by experts . The need to backup social media accounts is ever increasing and people are looking to back up their Facebook, Twitter, Linkedin and other social networking sites. There is ever increasing threat of account hacking or blocking of a social media account. Backupify fulfills this need. It is a Google App basically.

Overview

Backupify is a secure and is most popular online service. It backs date of Facebook, Google Apps, Picasa and several other accounts.

If you have accidentally deleted data, you can still restore it.

Pricing

It has two paid plans and fantastic free plan as well and in free plan lots of popular cloud apps are covered. There is different storage limit and schedule of backup with each plan yet all plans come with 30 days free trial time. .

Getting Started

There is list of services that Backupify supports and you can start soon after sign up. In fact design is user friendly and common users can easily find what they are looking.

Backup Mission

This process begins with a simple step, allowing access to social networks only using login credentials.

Allowing Access to Social Network like Twitter Account

For your twitter feed, Backupify for twitter creates daily archives and important tweets. You can download you backup data as search-able PDF book when your twitter is offline.

Status Message

This setup just takes minutes and your information is stored safely in the cloud and your account is added to backup queue and you are always informed when import is complete.

Accessing Archives

History of Backups

Through Backupify you get centralized access to all of your stored information and app informs you that its will take few moments to complete the backup.

Backup in Progress

Through history tab you can keep eye on the status of backup.

Portal 2 Crashes

2012-01-05T21:51:00.001-08:00

Portal 2

Portal 2 crashes are experienced because of several technical conflicts. In some computers, interruptions by your security software, wrong modifications in files and system configurations were found behind this problem.

This article is a detailed troubleshooting guide for fixing Portal 2 crashes.

1. Check Minimum System Requirements

2. Turn Off your Firewall and Reset DEP

3. Use Compatibility Mode Option

4. Reinstall Microsoft Visual C++ Redistributable

5. Clean-Up the Registry

6. Update Windows Drivers

Check Minimum System Requirements

Make sure that your computer is capable of paying Portal 2. If the computer belongs to an older version, it most probably fails to run the game and you experience this problem.

Your computer must have the following hardware and software components installed in order to run this game:

· Operating System: Microsoft Windows 7, Vista or XP

· Processor: AMD 64X2 or Intel Pentium 4 3.0 GHz, Dual Core 2

· Free Hard Disk Space: 7.6 GB

· RAM: 1 GB for Windows XP or 2 GB for Windows Vista/ 7

· Graphics Card: 128 MB which supports DirectX 9

· Sound Card: Any sound card that supports DirectX

Turn Off your Firewall and Reset DEP

As I said earlier, Windows Firewall can be stopping Portal 2 from running. The best way is to turn it off whenever you want to play the game.

1. Click Start | Control Panel.

2. Click System and Security | Windows Firewall.

3. On the left hand side, click Turn Windows Firewall On or Off. (See below figure)

4. Select Turn Off Windows Firewall for both Home or Work and Public network locations.

5. When you’re done, click OK to confirm.

If you still experience Portal 2 crashes after turning off your firewall, then exclude it from DEP. DEP refers to Data Execution Prevention, which is another security feature in Windows Vista and Windows 7 operating systems.

1. Click Start, right click My Computer.

2. Select Properties.

3. On the left hand side, click Advanced System Settings.

4. From Performance, click Settings button under Advanced tab. (See below figure)

5. In the new dialog, click Data Execution Prevention tab.

6. Select the second option Turn on DEP for all programs and services except those I select and locate the main executable file of your game.

7. Click Open | OK | OK.

Use Compatibility Mode Option

The Compatibility Mode option can be found in the File Properties dialog of Portal 2 shortcut file. By using it, you can prevent Portal 2 crashes if there is an issue with the compatibility with your operating system.

1. Right click Portal 2 desktop shortcut and select Properties.

2. In the new dialog, click Compatibility tab.

3. Check mark Run this game in compatibility mode for.

4. Select an earlier version of Windows from the next drop down box provided.

5. Click OK.

Reinstall Microsoft Visual C++ Redistributable

Problems belonging to the installation of Microsoft Visual C++ Redistributable can also cause Portal 2 crashing. To prevent this problem, simply reinstall this tool.

1. Click Start, select Control Panel.

2. Click Programs and then Uninstall a Program.

3. Select Microsoft Visual C++ Redistributable from the list of programs that appear.

4. Select Uninstall option.

5. Let the setup wizard load. When you’re prompted to select a task, select Uninstall or Remove this program option and click Next.

6. After the process is finished, click Finish.

7. Download a fresh setup from Microsoft Download Centre.

8. As soon as the download is finished, run it and continue with the installation.

Clean-Up the Registry

Often registry related issues cause Portal 2 to crash. What you have to do is download a Registry Cleaner, perform such as RegInOut and perform a full registry scan and find out whether problems exist in the Portal 2 registry paths or not. If there are errors, clean them up.

Update Windows Drivers

Are you running your machine with up-to-date device drivers? Portal 2 crashes are experienced if your drivers are out-of-date. Download a Driver Updater tool online. Scan for the latest driver releases and download them immediately.

Win 7 Antivirus Detection and Removal

2012-01-05T08:11:00.000-08:00

Win 7 Antivirus is rouge antivirus software which claims to disinfect your system based on fake scan results. It won’t either show genuine notifications. This article contains the Win 7 Antivirus detection and removal instructions.

1. Scan your Computer

2. Delete Startup Entries

3. Delete the Spyware Information from the Registry

4. Delete Spyware Files Stored on your Hard Disk

Scan your Computer

Using a genuine antivirus software, entirely scan the system and remove infected files. Be sure to update its definitions before you begin the scan process.

Delete Startup Entries

The startup entries are made by Win 7 Antivirus so that it will automatically run each time Windows has been started. You must delete these entries before you begin the steps given here-after.

1. Restart the computer.

2. Press F8 key repeatedly. Select Safe Mode with Networking option and press ENTER.

3. Click Start, select Run. Or press Windows Key + R.

4. Type MSCONFIG and press ENTER.

5. Click Startup tab, deselect all the startup entries and click Apply.

6. Click Services tab, mark Hide all Microsoft Services as checked. Deselect all the services entries and click Apply | OK.

7. Restart the computer when you’re prompted to do so.

Delete the Spyware Information from the Registry

The spyware entries are stored in the registry. Win 7 Antivirus detection and removal step is to delete such entries by modifying your registry.

1. Click Start, select Run.

2. Type RegEdit and press ENTER.

3. Browse and delete the following registry keys:

HKEY_LOCAL_MACHINE => SOFTWARE => Clients => StartMenuInternet => FIREFOX.EXE => shell => safemode => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%Program Files% => Mozilla Firefox => firefox.exe” -safe-mode’
HKEY_LOCAL_MACHINE => SOFTWARE => Clients => StartMenuInternet => IEXPLORE.EXE => shell => open => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%Program Files% => Internet Explorer => iexplore.exe”‘
HKEY_LOCAL_MACHINE => SOFTWARE => Clients => StartMenuInternet => FIREFOX.EXE => shell => open => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%Program Files% => Mozilla Firefox => firefox.exe”‘
HKEY_CURRENT_USER => Software => Classes => .exe “(Default)” = ‘exefile’
HKEY_CURRENT_USER => Software => Classes => .exe “Content Type” = ‘application/x-msdownload’
HKEY_CURRENT_USER => Software => Classes => exefile “(Default)” = ‘Application’
HKEY_CURRENT_USER => Software => Classes => exefile “Content Type” = ‘application/x-msdownload’
HKEY_CURRENT_USER => Software => Classes => exefile => DefaultIcon “(Default)” = ‘%1?
HKEY_CURRENT_USER => Software => Classes => exefile => shell => open => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%1? %*’
HKEY_CURRENT_USER => Software => Classes => .exe => DefaultIcon “(Default)” = ‘%1? = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%1? %*’
HKEY_CURRENT_USER => Software => Classes => .exe => shell => open => command “IsolatedCommand” = ‘”%1? %*’
HKEY_CURRENT_USER => Software => Classes => .exe => shell => runas => command “(Default)” = ‘”%1? %*’
HKEY_CURRENT_USER => Software => Classes => .exe => shell => runas => command “IsolatedCommand” = ‘”%1? %*’
HKEY_CURRENT_USER => Software => Classes => exefile => shell => runas => command “IsolatedCommand” – ‘”%1? %*’
HKEY_CLASSES_ROOT => .exe => shell => open => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%1? %*’
HKEY_CLASSES_ROOT => exefile => shell => open => command “(Default)” = ‘”%UserProfile% => Local Settings => Application Data => [random].exe” /START “%1? %*’
HKEY_CURRENT_USER => Software => Classes => exefile => shell => open => command “IsolatedCommand” = ‘”%1? %*’
HKEY_CURRENT_USER => Software => Classes => exefile => shell => runas => command “(Default)” = ‘”%1? %*’

4. Close Registry Editor.

Delete Spyware Files Stored on your Hard Disk

The next Win 7 Antivirus detection and removal step is to delete all the spyware files from your hard disk.

1. Press Windows Key + R. Or click Start, select Run.

2. Type %AppData%\Local and press ENTER.

3. Delete all files which are randomly named. For example, 01.exe, 02.exe.

4. Open Run, type %AppData%\Roaming\Microsoft\Windows\Templates.

5. In the same way, delete all random files.

6. Open Run, type %AllUsersProfile% and press ENTER.

7. Delete all random files found.

8. Finally close My Computer.

Download Win 7 Antivirus Removal Software (Spamfighter) ...

Sound Drivers Download

2012-01-04T23:00:00.000-08:00

A Sound Driver is an essential driver required for each and every Windows based computer. Because of a sound driver, your speakers can play the audio. Otherwise, they are useless. Since Sound Driver is a classified type of ‘Device Driver’, we should become familiar with it first.

A Device Driver is a computer software that communicates with the connected devices through bus or communications subsystem where the actual hardware is connected. In easy-to-understand language, we can say it allows high-level computer programs to communicate with your computer hardware.

Sound Driver is a part of the term Device Driver. It can easily be understood that it becomes a channel of communication between your operating system and speakers connected to the computer. Your computer can play sound tracks and audio films if proper sound drivers are installed.

The main problem is that there is no single website where the people in the world can download sound drivers. Depending on the motherboard, operating system, its versions and other system specifications, sound drivers can be downloaded. If you fail to download proper sound driver, your speakers will be not work and you will fail to listen music and sound tracks from it.

It is important that you should choose the appropriate version of sound driver and download it to your desktop. Failing to do so can make problems. This article will share with you a few locations from where you can download the sound drivers.

1. Realtek AC 97 Audio Driver for Intel Motherboards:

http://www.realtek.com.tw/downloads/

2. Asus Sound Card Drivers:

http://drivers.softpedia.com/get/SOUND-CARD/Asus/

3. MSI Sound Drivers:

http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/Msi-RS480M-Realtek-ALC-Series-AC97-Audio-Driver-510006230-XP64.shtml

4. Gigabyte Sound Drivers:

http://en.kioskea.net/download/download-1115-sound-card-driver-for-motherboard-gigabyte-ga-ma770-ds3

5. Simmtronics Semiconductors Sound Drivers:

http://www.simmtronics.com/drivers/simm-int-h55-v1/sound/VISTA_W7.zip

All above are links given to sound drivers download for Windows 7, Vista and XP based operating systems. Click any of the above links depending upon the sound card you use.

The best way is to use a Sound Driver Updater, a program that automatically finds suitable drivers for your computer. Then grant it to download and install the appropriate sound drivers for your computer.

Vista 2012 Virus Removal Tips

2012-01-04T06:50:00.001-08:00

Download Vista 2012 Virus Remover (SpamFighter).

Vista Antivirus 2012 belongs to a fake antivirus program specially designed for Windows Vista operating system.

It claims to scan your hard disk for virus infection. It shows dozens of fake infections and prompts you to register the program in order to disinfect the computer. After registration, the user observes he has gotten nothing and has wasted the amount paid for the registration charges. In a single line, we can say that it is a type of online scam.

Here, I am sharing with you Vista 2012 Virus Removal Tips. You are strongly recommended to ignore the false notifications given by Antivirus 2012.

1. Load a Rescue Disc

2. Delete Vista Antivirus 2012 Files

3. Remove the Registry Settings

4. Disable Startup Entries

Load a Rescue Disc

A Rescue Disc is a self-bootable disc offered by antivirus companies. It is easy to download from official websites of some antivirus products.

The ISO file downloaded from the internet has to be burned on a blank CD/ DVD ROM and then inserting the same in infected machine can help as a good Vista 2012 virus removal tip. Refer the provided manuals for more information.

Delete Vista Antivirus 2012 Files

There are several files stored on your hard disk which are used by Vista Antivirus 2012. Vista 2012 virus removal tip is to delete these files from your hard disk.

1. Boot your computer in the Safe Mode. To do so, restart it first, press F8 randomly, select Safe Mode with Networking option and press ENTER.

2. Click Start, select My Computer.

3. From the following directories, delete the randomly named files:

a. C:\Users\VikasM\AppData\Roaming\Microsoft\Windows\Templates

b. C:\Users\VikasM\AppData\Local

4. Close My Computer.

Remove the Registry Settings

Another Vista 2012 Removal tip is to delete the virus made registry settings in order to stop it from accessing the data. However, modifying the registry is not a simple task. Any unwanted change made in the registry can make your system unstable, that is why, a Registry Cleaner such as the Intel Software Partner RegInOut is recommended rather than modifying the registry manually.

1. Click Start, select Run.

2. Delete the following registry entries:

a. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\FIREFOX.EXE\shell\safemode\command “(Default)” = ‘”%LocalAppData%\kdn.exe” -a “C:\Program Files\Mozilla Firefox\firefox.exe” -safe-mode’

b. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center “AntiVirusOverride” = ’1′

3. Close Registry Editor.

Disable Startup Entries

Using System Configuration, disable the startup entries made by Vista Antivirus 2012. Do the steps given below:

1. Click Start, select Run.

2. Type MsConfig and press ENTER.

3. Click Startup tab and disable items with random file names.

4. Do the same thing for the items in the Services tab.

5. Click Apply | OK.

6. Restart your machine in the Normal Mode.

Download Vista 2012 Virus Remover (SpamFighter).

Remove Win 7 Antispyware

2012-01-03T08:12:00.000-08:00

Win 7 Antispyware is a rouge anti-spyware program. It states that your computer is infected by virus and asks you to register the program so that you can remove such infections. In order to register it you are asked to pay the price.

To remove Win 7 Antispyware 2012, do the steps given below:

1. Delete Win 7 Antispyware Program Files

2. Delete the Information stored in your Registry

3. Download a Powerful Antivirus

4. Reset Internet Settings

Download Win 7 Antispyware Recommended Fix (Spamfighter).

Delete Win 7 Antispyware Program Files

All the files installed by Win 7 Antispyware should be deleted permanently. Below are some locations where you can find these files and delete them manually. This will remove Antispyware 2012.

1. Open My Computer.

2. Open C:\Program Data. Delete the folder named U3F7PNVFNCSJK2E86ABFBJ5H.

3. Open C:\Users\VikasM\AppData\Local. Delete the file called PPN.EXE. Delete the U3F7PNVFNCSJK2E86ABFBJ5H folder.

4. Open C:\Users\VikasM\AppData\Local\Temp. Press Ctrl + A and then Delete key of your key board.

5. Click Back button until root directory appears. Click F3 key. Type U3F7PNVFNCSJK2E86ABFBJ5H and press ENTER.

6. From the search results, delete all the folders found with this name, if any.

Delete the Information Stored in your Windows Registry

The next step is to remove the registry entries made by Windows 7 Antispyware in the system registry. This is because these keys are used to store its information and make it function properly.

1. Click Start, select Run. Type RegEdit and press ENTER.

2. When you are prompted for administrative privileges, click Yes.

3. Delete the following registry entries or otherwise delete them with the help of a Registry Cleaner.

a. HKEY_CURRENT_USER\Software\Classes\.exe “(Default)” = ‘exefile’

b. HKEY_CURRENT_USER\Software\Classes\.exe “Content Type” = ‘application/x-msdownload’

c. HKEY_CURRENT_USER\Software\Classes\.exe\DefaultIcon “(Default)” = ‘%1? = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%1? %*’

d. HKEY_CURRENT_USER\Software\Classes\.exe\shell\open\command “IsolatedCommand” = ‘”%1? %*’

e. HKEY_CURRENT_USER\Software\Classes\.exe\shell\runas\command “(Default)” = ‘”%1? %*’

f. HKEY_CURRENT_USER\Software\Classes\.exe\shell\runas\command “IsolatedCommand” = ‘”%1? %*’

g. HKEY_CURRENT_USER\Software\Classes\exefile “(Default)” = ‘Application’

h. HKEY_CURRENT_USER\Software\Classes\exefile “Content Type” = ‘application/x-msdownload’

i. HKEY_CURRENT_USER\Software\Classes\exefile\DefaultIcon “(Default)” = ‘%1?

j. HKEY_CURRENT_USER\Software\Classes\exefile\shell\open\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%1? %*’

k. HKEY_CURRENT_USER\Software\Classes\exefile\shell\open\command “IsolatedCommand” = ‘”%1? %*’

l. HKEY_CURRENT_USER\Software\Classes\exefile\shell\runas\command “(Default)” = ‘”%1? %*’

m. HKEY_CURRENT_USER\Software\Classes\exefile\shell\runas\command “IsolatedCommand” – ‘”%1? %*’

n. HKEY_CLASSES_ROOT\.exe\shell\open\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%1? %*’

o. HKEY_CLASSES_ROOT\exefile\shell\open\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%1? %*’

p. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\FIREFOX.EXE\shell\open\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%Program Files%\Mozilla Firefox\firefox.exe”‘

q. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\FIREFOX.EXE\shell\safemode\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%Program Files%\Mozilla Firefox\firefox.exe” -safe-mode’

r. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\StartMenuInternet\IEXPLORE.EXE\shell\open\command “(Default)” = ‘”%UserProfile%\Local Settings\Application Data\[random].exe” /START “%Program Files%\Internet Explorer\iexplore.exe”‘

4. When you are done, close Registry Editor window.

Download a Powerful Antivirus/Antispyware

In order to remove Win 7 Antispyware, download and install a good antivirus program. Scan all the partitions in your hard disk and remove infected files, if any. Be sure to update the program on a regular basis so that you’ll be able to avoid such problems in the future.

Reset Internet Settings

It is also important to revert any changes made by Win 7 Antispyware 2012 with your internet connection. Follow these guidelines:

1. Click Internet Explorer icon on your Taskbar.

2. Press Alt, click Tools | Internet Options.

3. In the new dialog, click Advanced tab and then Reset button.

4. Make Delete Personal Settings checked. Click Reset to confirm.

5. Now click Connections tab. Click LAN Settings.

6. Deselect the box Use a proxy server for your LAN and remove the information filled in Address and Port fields.

7. Click OK.

8. Restart the program.

Download Win 7 Antispyware Recommended Fix (Spamfighter).

Webcam Drivers for Windows 7

2011-12-31T18:19:00.000-08:00

A Webcam is a video camera connected to a computer via USB, pre-loaded with a laptop, connected through Ethernet or Wi-Fi connections. It is often used for the purpose of video conferencing, video and voice calls and internet meetings.

Webcam

Well, if you have purchased a new webcam for your Windows 7 based computer, then it is simple to install it. The installation procedure doesn’t include merely connecting it to the computer but also to install appropriate drivers to make it functioning. Without a driver, it would be like ‘a body without soul’.

Webcam drivers for Windows 7 can be found on different places depending on the product you use.

There are 5 ways of installing webcam drivers. They are given below. But the most common and simplest way is to to use a Driver Updater program as it reduces the amount of risks and saves much time in searching for compatible drivers.

Webcam Drivers for Windows 7 can be installed by:

Automatic installation through Plug & Play Technology
Using a Driver Updater Program
Manually searching and download drivers from the Manufacturer Website
Using Device Manager

Download Webcam Drivers for Windows 7 !

Automatic Installation through Plug & Play Technology

Plug & Play is a term used to describe the characteristic of a device specification (including your webcam) which facilitates the discovery of a hardware component in the system without the need of physical device configuration or user intervention in resolving resource conflicts.

Balloon showing Device Driver Installation Status

If your webcam is based on this characteristic, then you need not to separately search and install drivers for it. This is because the webcams based on this characteristic have the ability to automatically install its driver without user attention.

You just connect your webcam via USB, Ethernet or Wi-Fi and then wait till your computer starts detecting it. As soon as your computer detects the webcam, a notification balloon may appear on the System Tray (near Date-Time information) and the process will be automatically continued. So you need not to do anything.

Use Driver Updater Program

A Driver Updater program is based on the ability to find new drivers for the devices connected to your computer (including your new webcam).

It is a simple and user friendly program that searches online the latest drives available for your webcam and ask you for confirmation. When you accept, it will automatically download and install the most appropriate version which is specially designed for your computer specifications.

In this way, you not only save time in searching webcam drivers for Windows 7; but also reduce the amount of risk of downloading unsupported versions. Often during manual installation we increase the risk of downloading unsupported versions of webcam drivers and we end with computer errors, operating system crashes, unstable operating system and data losses.

Manually Search Webcam Manufacturer Website

You can manually search the website of your webcam manufacturing company. Click the Downloads or similar navigation links. Select the webcam model, your operating system and its version and then continue with that process. For more instructions, please visit the webcam manual or contact the customer support department.

Use Device Manager

Open Device Manager and scan for hardware changes. Let Windows automatically find the most appropriate driver for your webcam.

Device Manager

Click Start | Control Panel.
Click System and Security | Administrative Tools.
Double click Computer Management.
On the left hand side panel, expand Computer Management (Local) | System Tools.
Select Device Manager.
Right click the computer name and select Scan for hardware changes. If this option fails, then select Add Legacy Hardware instead.

Download Webcam Drivers for Windows 7 !

CMOS Checksum Bad Error

2011-12-31T07:10:00.000-08:00

A computer may fail to boot and display CMOS Checksum Bad Error Screen. Although this problem is very frustrating but there are different approaches to fix it. This article discusses the step-by-step procedures which are used to fix this problem.

Causes:

CMOS Battery is discharged
CMOS Battery is not working properly
BIOS Settings are improperly changed
Last time the computer was not properly shut down
Recent BIOS update was corrupt
Problem with your RAM
Problem with your Motherboard

CMOS Battery is Discharged

CMOS Checksum Bad Error may occur if the CMOS battery is discharged. Restart your computer to check whether the error still exists or not. If it exists, turn the computer off, open CPU Cabinet and replace the CMOS Battery.

CMOS Battery is Not Functioning Properly

The CMOS Battery installed on your motherboard may not be functioning properly. Replacing it will fix your problem.

BIOS Settings are Improperly Changed

BIOS stand for Basic Input Output System. If the BIOS settings are improperly changed, it may lead to CMOS Checksum Bad Error.

The solution is to reset the BIOS settings. First, press the Emergency Reboot button, then press Delete for a few time. Click the Exit menu and select Load Default Settings. Finally, select Save Changes and Exit to restart your computer.

Last Time the Computer was Not Properly Shut Down

CMOS Checksum Bad Error can encounter because of recent system crash with unexpected system reboot. Just rebooting your computer again can fix the problem.

Recent BIOS Update was Corrupt

If you have updated your BIOS recently it could be the reason behind CMOS Checksum Bad Error. Simply rollback the recent update and then restart your computer.

Problem with your RAM

Another reason behind CMOS Checksum Bad Error is faulty RAM. If you have a single RAM, then replace it. Otherwise if you have two or more RAMs, test them one by one individually. This strategy will help diagnosing your problem and identify the faulty RAM, if any.

Problem with your Motherboard

Your motherboard may be damaged. If it is not functioning properly, you may receive CMOS Checksum Bad Error. Consider replacing it.

TIP: Fix CMOS Checksum Bad Error by Updating Drivers from Here